If any of the tips above seem daunting, it’s because without the proper training and preparation, they can be. CNY Roof Cleaners has established a cleaning method that leaves the guesswork out of the homeowner’s hands and keeps fences sparkling all through the summer season. Fences are prominent features to any home and must be cared for with the most absolute care and attention to detail – and our process has been refined over the years with amazing results.

After identification and inspection, our fence technicians mix safe solutions, restore color and remove any organic growth that has taken over. We then apply a low pressure rinse to remove any additional growth on the wood. Lastly, our technicians will recommend the best stain for your wood type to help preserve the fence during the long CNY winter and storm seasons.

As you know, shingles make up your roof. But did you know that there’s more to it than that?

There are many different layers protecting your home from the elements. The first layer is called the deck. This is the surface that touches the ground. It’s covered with gravel to make it waterproof. 
Next, felt paper sheets are glued to the deck to protect it against moisture and other elements. Then comes a layer of asphalt, which is covered by shingles (usually three or four layers, depending on how durable they need to be).

That’s all well and good when everything still looks new and shiny. But once those shingles start to age, cracks begin forming in the asphalt underneath them — and these cracks let water in behind them. Once water gets behind shingles, it can cause mold growth on the wood underneath them, damaging your home significantly over time if left untreated.

But before you shell out thousands of dollars for a brand new roof, let’s talk about the benefits of roof coating.

As a general rule of thumb, here’s how long each type of roof will last:

• Asphalt Shingles: 20-30 years
• Copper: 50-100 years
• Wood Shakes: 40-60 years
• Slate: 100-150 years

The coating is typically applied to the top layer of shingles or asphalt tiles and then spread out with a roller or brush. We can also spray on it with a sprayer machine designed for rooftops.

You should always get an expert opinion before deciding whether or not to re-coat your existing roof. But so you’re aware, here are signs you need coating:

• Your roof has mold or moss
• There are minor holes and leaks
• Your roof’s color is fading
• The shingles are deteriorating

Still, it can be hard to make a decision. Should you get just one coating or two? Or should you get a new roof altogether?

Here are the top 3 benefits of roof coating that may answer all your questions:

1. It protects your home from leaks
A roof coating creates a barrier against moisture. This is especially helpful if you have problems with water getting into your attic space through vents or other openings in your house’s exterior walls. 

Did we mention that our coating mixture is water-resistant? This allows moisture from rainwater runoff or melting snow to pass through them quickly, so water doesn’t build up over time.

2. It helps prevent mold growth

Coating your roof with this sealant keeps moss and algae from growing on your roof. This reduces the growth of mildew and mold inside the house, as well.
It also helps keep those insects out of your attic!

3. It increases durability

New York has harsh weather conditions. We can go from negative 20 degrees to sweltering summer heat. 

A coating is a low-cost solution to shingle replacement or a new roof. It can stabilize a shingled layer to reduce further granular loss and deterioration.

A properly applied coating will help make your roof last longer than it otherwise would without one. It protects against UV rays that can fade paint, so coating also preserves the color of your roof.
Plus, once it dries, there will be a beautiful, new sheen to your shingles!

Need a custom roof coating? Our Protective Roof Coating is best for exte
nding the life of your roof’s shingles!

Large potted plants left on deck can cause spots or stains to the wood surfaces due to soil and water runoff and debris getting stuck around it.  Check the surrounding and keep trees and landscape trimmed back. Shrubs, trees, and other plants can become problematic if allowed to grow too close to the sides of your deck.  ​

The surfaces of your deck collects dirt, debris, pollen, and other grime on a daily basis. Don’t let leaves pile up or anything stay damp for a long period of time.  Left unchecked, this debris can degrade the paint, stain, or wood decking.  Sweep your deck and rinse it off often with water to clean surfaces.

To remove stains, discoloration , mildew, and grime a deeper clean is needed. 

Pressure washing is not as easy as it looks and with an untrained user it can easily cause damages and injuries when people are not sure what they are doing. Instead, hire an insured professional to pressure wash your property. ​

Investing in a high quality coating for your deck helps it last longer. Stick with a coating that repels water. This will stop the water from seeping into the surface of the wood. ​

If you have a roof line that runs along the deck, gutters can prevent all that additional splashing. If you already have gutters, make sure they are cleaned out – you don’t want it pouring over and making your deck unnecessarily wet with dirty water.  

The Importance of General Liability Insurance
​
When any of the above-mentioned incidents occur on your part, general liability insurance takes charge of the situation. This program is responsible for paying court fees, attorney’s fees, settlements, etc., following the policy limit. Generable liability insurance is an essential part of any business since it covers the type of accidents that any business is likely to encounter.  

Workers’ Compensation Insurance is also called Workers’ Comp or Workman’s Comp. This insurance program is for the employees of the business. When an employee of your business contacts an injury, illness, or suffering, it will cover. It applies to all companies, even to those with only one employee.
Subtle details of this insurance might differ from industry to industry. Generally, this policy covers:
●       Medical expenses of the injured / sick employees.
●       Replacement wages when the injured employees cannot show up for work.
●       Liability expenses if your business gets sued for a work injury.
●       In case of fatal occupational injuries, it also covers funeral and dependent support payments.
Small businesses with no employees can also benefit from this insurance because it can cover a working business owner.
​
Why Should You Hire A Company with General Liability Insurance?

General Liability Insurance is a must for construction and home service companies especially. Because such businesses involve working with customers on their property and making their employees work on customers’ property. Because without this policy, a company is not even safe to work on your property.
(Alt Tag: Workers Compensation and Liability)
(Image Name: workers-compensation-and-liability)

Why Hiring a Company with Workers’ Compensation is a Must?

If you are hiring a deck cleaning service with no workers’ comp, you are indeed hiring a business that is not safe for its employees. How can it be suitable for your home? Worker’s Comp is a protection insurance policy for employees since it covers their medical charges in case of any injury/illness. Therefore, hiring a Company with Workers’ Compensation is a Must for House Cleaning Services.

​Liability and Worker’s Compensation both are mandatory for a business. CNY Roof Cleaning offers the service to call for all in-house cleaning services such as patio, deck, pavers, roof, and gutter system cleaning. This company follows all laws and is a safe point for its customers and employees.

• Inspect for damages or weak areas: The roof needs to be inspected before and after winter. During the inspection, the professional will determine if there are worn or damaged shingles, broken seals, and poor flashing.
• Clean gutters and remove ice dams: When the gutters are clear and ice dams removed, melting ice and water can travel off the roof freely.
• Attic and exhaust vent inspection: Experts will inspect the attic and ensure no weaknesses in your roof and ceiling. In addition, they will ensure the vents are unclogged and clear.

 
If you suspect there is damage to your roof, call us today for an inspection. Prevention is the best way to avoid roof leaks in the winter! Hire trained professionals to inspect and repair any damages to the roof and save yourself costly future damages.

Areas We Service: ​Auburn, Baldwinsville, Bridgeport, Canastota, Cazenovia, Cicero, Camillus, Central Square, Chittenango, Cicero, Fabius, Fayetteville, Fulton, La Fayette, Liverpool, Manlius Marcellus, Mexico, Minoa, Oswego, Owasco, Parish, Phoenix, Pulaski, Skaneateles, Sylvan Beach, Syracuse, Tully, Weedsport

Roof Leak Near Me

In our area Gable vents are highly recommend. If you walk around your home and notice there are NO gable vents, there is a big chance your attic might have mold. Homes with only ridge vents and soffit vents sometimes do NOT allow sufficient air flow. Soffits can easily get blocked by attic insulation and we know for our north eastern climate you cant skip out on insulation. 

Airflow is important! Gable vents offer passive ventilation of the attic space and roof. This allows cool air in and hot air out.  This prevents hot air from causing condensation on the inside of the attic. 

Wet insulation means there is moistures in the attic. It could be from condensation or a roof leak. The source water needs to be correct and the insulation needs to be dried out.  When that insulation is exposed to moisture, mold can grow.  If insulation is left wet for long enough, mold and bacteria will start to grow in it. The longer wet insulation is left untreated the more mold spores grow and the greater the risk to your health and home becomes.

Insulation can be dried out but if its molded it may need to be replaced. Replacing insulation can be an expensive, time-consuming, and labor-intensive process, but it is also an issue that cannot be ignored. The moment you suspect your insulation is wet, you should check it out.